I thought I liked release agent. Does it not help prevent sticking? I do a silly GumOut and talcum powder surface treatment that has helped prevent transfer, chafing, twittering, and sticking.Viande wrote:Thought I might add a little here. If this is not the place or if it has been covered please move or just delete.
The OEM door and hatch seals are Grey. This is a release agent and should be removed prior to installation. Once installed they should also be lubricated with silicone to aid the break-in process. I generally clean mine prior to shipping to save the customer the trouble but I know most do not. So I thought it worth mentioning so people do not install them as they arrive. Good luck
Are you familiar with Gummiflege® seal conditioner available until recently from BMW dealers?
Colin