weak connection with temp sensor II ; lean or rich?
Posted: Thu Nov 03, 2016 7:00 pm
I had a temp sensor II that had worked it's way loose (threads are partially stripped). So late this summer, I reinstalled with just a dab of blue loctite (same as I did before). Me thinks I may not have had it all the way screwed in the last time I did this....seemed I was able to turn it in farther.
My question is, after I did this, it appears to be running leaner. I richened the static setting out two notches (which, interestingly, put it back to the original, presumably stock setting (I bought a rebuilt AFM about 8 years ago) and this seemed to help.
So my question is, if I didn't have a solid ground with the TS II would it make it think it was running rich, or lean?
My question is, after I did this, it appears to be running leaner. I richened the static setting out two notches (which, interestingly, put it back to the original, presumably stock setting (I bought a rebuilt AFM about 8 years ago) and this seemed to help.
So my question is, if I didn't have a solid ground with the TS II would it make it think it was running rich, or lean?