Single stage or Base and clear, pro and cons
- Mulcheese
- Getting Hooked!
- Location: Maple Grove, Mn
- Status: Offline
Single stage or Base and clear, pro and cons
Im trying to make a decision. Will be doing my first true auto paint job this spring painting the westy.
I can't decide between single stage or base and clear. I'm not looking for show quality. I will be taping off windows. Removing handles and lenses and..... Some sanding to bare metal and some spots of filler.
I'm not to concerned about the end results because whatever I do will turn out awesome. I might even consider a rattle can job but I'm looking for a bit more quality and longevity.
So, what are the pros and cons of these two different jobs? Would one fit my requirements better than the other?
I can't decide between single stage or base and clear. I'm not looking for show quality. I will be taping off windows. Removing handles and lenses and..... Some sanding to bare metal and some spots of filler.
I'm not to concerned about the end results because whatever I do will turn out awesome. I might even consider a rattle can job but I'm looking for a bit more quality and longevity.
So, what are the pros and cons of these two different jobs? Would one fit my requirements better than the other?
"attending to things in the moment with curiosity and acceptance."
____________________
82 Vanagon Westy - aka: Honey Badger - "cause she just dont give a ...."
____________________
82 Vanagon Westy - aka: Honey Badger - "cause she just dont give a ...."
- hambone
- Post-Industrial Non-Secular Mennonite
- Location: Portland, Ore.
- Status: Offline
Re: Single stage or Base and clear, pro and cons
I like single stage, no messin around or clearcoat peelin' someday.
http://greencascadia.blogspot.com
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
- Amskeptic
- IAC "Help Desk"
- Status: Offline
Re: Single stage or Base and clear, pro and cons
Rattle can. Eight years old. Single Stage. E-Z touch-up.Mulcheese wrote: I might even consider a rattle can job but I'm looking for a bit more quality and longevity.
BobD - 78 Bus . . . 112,730 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles
- Mulcheese
- Getting Hooked!
- Location: Maple Grove, Mn
- Status: Offline
Re: Single stage or Base and clear, pro and cons
Yes I have seen this before, looks nice, but I want to get some guns and learn that process.
I have been leaning towards single stage. Someone told me the problem is if I need to touch up that is difficult. Also it is my understanding that there is a lot of wet sanding for a quality job. Is that the case?hambone wrote:I like single stage, no messin around or clearcoat peelin' someday.
"attending to things in the moment with curiosity and acceptance."
____________________
82 Vanagon Westy - aka: Honey Badger - "cause she just dont give a ...."
____________________
82 Vanagon Westy - aka: Honey Badger - "cause she just dont give a ...."
- Bleyseng
- IAC Addict!
- Location: Seattle again
- Contact:
- Status: Offline
Re: Single stage or Base and clear, pro and cons
Yup, if you don't do it right "How come all this is peeling off?"hambone wrote:I like single stage, no messin around or clearcoat peelin' someday.
Single stage is easy to sand, buff out minor mistakes. Wet sand with 1500 grit and use the sitex bars and a buffer with a lambswool disc to make it smooth. That is how I painted cabinets in SU for 4 years with auto paint. Everyone wanted a high gloss finish!
Geoff
77 Sage Green Westy- CS 2.0L-160,000 miles
70 Ghia vert, black, stock 1600SP,- 139,000 miles,
76 914 2.1L-Nepal Orange- 160,000+ miles
http://bleysengaway.blogspot.com/
77 Sage Green Westy- CS 2.0L-160,000 miles
70 Ghia vert, black, stock 1600SP,- 139,000 miles,
76 914 2.1L-Nepal Orange- 160,000+ miles
http://bleysengaway.blogspot.com/
- Amskeptic
- IAC "Help Desk"
- Status: Offline
Re: Single stage or Base and clear, pro and cons
Therefore, you don't want to do a rattle can job.Mulcheese wrote:Yes I have seen this before, looks nice, but I want to get some guns and learn that process.Amskeptic wrote: Rattle can.
So, you are not "I might even consider a rattle can job".
Colin
BobD - 78 Bus . . . 112,730 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles
- Mulcheese
- Getting Hooked!
- Location: Maple Grove, Mn
- Status: Offline
Re: Single stage or Base and clear, pro and cons
Yes, wrong choice of words. I should have said "I have considered a rattle can job but now want more". Why I mentioned a rcj is to emphasize that I am not looking for the chow quality job, not that yours wasn't.Amskeptic wrote:Therefore, you don't want to do a rattle can job.Mulcheese wrote:Yes I have seen this before, looks nice, but I want to get some guns and learn that process.Amskeptic wrote: Rattle can.
So, you are not "I might even consider a rattle can job".
Colin
"attending to things in the moment with curiosity and acceptance."
____________________
82 Vanagon Westy - aka: Honey Badger - "cause she just dont give a ...."
____________________
82 Vanagon Westy - aka: Honey Badger - "cause she just dont give a ...."
- Amskeptic
- IAC "Help Desk"
- Status: Offline
Re: Single stage or Base and clear, pro and cons
I have never been so insulted as now.Mulcheese wrote: I am not looking for the chow quality job, not that yours wasn't.
Colin
BobD - 78 Bus . . . 112,730 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles
- Mulcheese
- Getting Hooked!
- Location: Maple Grove, Mn
- Status: Offline
Re: Single stage or Base and clear, pro and cons
Oops. Sorry I guess that is what the preview button is for. I meant show quality.Amskeptic wrote:I have never been so insulted as now.Mulcheese wrote: I am not looking for the chow quality job, not that yours wasn't.
Colin
"attending to things in the moment with curiosity and acceptance."
____________________
82 Vanagon Westy - aka: Honey Badger - "cause she just dont give a ...."
____________________
82 Vanagon Westy - aka: Honey Badger - "cause she just dont give a ...."
- hambone
- Post-Industrial Non-Secular Mennonite
- Location: Portland, Ore.
- Status: Offline
Re: Single stage or Base and clear, pro and cons
Wet sanding is only necessary if you screw up. I got good at it.
Actually the biggest challenges I faced was proper air pressure, distance from surface, and time to dry, all things that come with experience.
Actually the biggest challenges I faced was proper air pressure, distance from surface, and time to dry, all things that come with experience.
http://greencascadia.blogspot.com
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
- Amskeptic
- IAC "Help Desk"
- Status: Offline
Re: Single stage or Base and clear, pro and cons
I don't bother to wet-sand engine tins and chassis parts, but I have never sprayed a finished finish right out of the can. I think there are trillions upon trillions of minute imperfections that allow paint to hold onto urban air pollution until you get the finish down. If you run your hand along the paint after a wax job and feel virtually no friction, yer there.hambone wrote:Wet sanding is only necessary if you screw up. I got good at it.
Actually the biggest challenges I faced was proper air pressure, distance from surface, and time to dry, all things that come with experience.
Colin
BobD - 78 Bus . . . 112,730 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles
- Mulcheese
- Getting Hooked!
- Location: Maple Grove, Mn
- Status: Offline
Re: Single stage or Base and clear, pro and cons
This is not the level that I am trying to achieve. What I do want is.... Sand the surface rust, fill the minor dents, throw down some good primer, cover with a lasting color. All for under $500. Is that beyond reality????Amskeptic wrote:
If you run your hand along the paint after a wax job and feel virtually no friction, yer there.
Colin
"attending to things in the moment with curiosity and acceptance."
____________________
82 Vanagon Westy - aka: Honey Badger - "cause she just dont give a ...."
____________________
82 Vanagon Westy - aka: Honey Badger - "cause she just dont give a ...."
-
- IAC Addict!
- Status: Offline
Re: Single stage or Base and clear, pro and cons
Why not try to achieve that level, as long as you are doing this?
- Mulcheese
- Getting Hooked!
- Location: Maple Grove, Mn
- Status: Offline
Re: Single stage or Base and clear, pro and cons
Yes I will make the best effort possible and if I get there great but if not I will still be pleased with the results. I just want to improve on what I currently have.Jivermo wrote:Why not try to achieve that level, as long as you are doing this?
"attending to things in the moment with curiosity and acceptance."
____________________
82 Vanagon Westy - aka: Honey Badger - "cause she just dont give a ...."
____________________
82 Vanagon Westy - aka: Honey Badger - "cause she just dont give a ...."
-
- Addicted!
- Location: Thomasville Georgia
- Status: Offline
Re: Single stage or Base and clear, pro and cons
I ain't no painter, as my projects show...but here's my cost break down on my new bug:
Primer: Napa quart size: $49
Primer: Tractor Supply Gallon: $35
Paint: Tractor supply Gallon: $29
Add-ins (reducer and hardener): Tractor Supply, small cans: $30
Sand Paper...dear lord...sandpaper: Harbor Freight: $55 (about $1 per sheet)
Super fine: 1500 / 2000 / 3000 grit: nearly $40 (Much less paper required, but, $4-$7 per sheet)
Clear Coat: O'reilley's $25
So, I'm in about $265 on paint for the topside of the car. I also used about a bajillion cans of RustReformer, at $6 per can (Harbor Freight), and a quart of black auto gloss on the chassis.
I already had a gallon of Bondo, from Walmart...don't remember the cost...I also already purchased the sprayer, which was about $50-60.
My Vanagon, using the Napa store brand stuff I mentioned in the other post, ran a little more than $800 in paint costs. I used only rattle can black on the chassis of it, after rust reformer.
A note...no matter how tempting, don't use a grinder on the rust spots... Spend money on the sand paper. I screwed up royally on the van that way.
Primer: Napa quart size: $49
Primer: Tractor Supply Gallon: $35
Paint: Tractor supply Gallon: $29
Add-ins (reducer and hardener): Tractor Supply, small cans: $30
Sand Paper...dear lord...sandpaper: Harbor Freight: $55 (about $1 per sheet)
Super fine: 1500 / 2000 / 3000 grit: nearly $40 (Much less paper required, but, $4-$7 per sheet)
Clear Coat: O'reilley's $25
So, I'm in about $265 on paint for the topside of the car. I also used about a bajillion cans of RustReformer, at $6 per can (Harbor Freight), and a quart of black auto gloss on the chassis.
I already had a gallon of Bondo, from Walmart...don't remember the cost...I also already purchased the sprayer, which was about $50-60.
My Vanagon, using the Napa store brand stuff I mentioned in the other post, ran a little more than $800 in paint costs. I used only rattle can black on the chassis of it, after rust reformer.
A note...no matter how tempting, don't use a grinder on the rust spots... Spend money on the sand paper. I screwed up royally on the van that way.