Page 1 of 1

poptop removal

Posted: Sun Aug 04, 2013 10:53 pm
by dingo
i need to remove the poptop temporarily....so i can squeeze into a garage to pull my engine ( 1 inch too tall !)

whats the best way to approach removal ?

Re: poptop removal

Posted: Mon Aug 05, 2013 8:43 pm
by whc03grady
All the trim first, then the hinges. You'll need at least one other person to help you lift it off...not that it's atrociously heavy, but that it's so awkward.

Or just let a bunch of air out of your tires.

Re: poptop removal

Posted: Mon Aug 05, 2013 11:09 pm
by Gypsie
I agree with the Air idea. 1 inch can be found there and still safely roll.

Re: poptop removal

Posted: Tue Aug 06, 2013 8:54 am
by jackstar
No brainer on the air.

Re: poptop removal

Posted: Tue Aug 06, 2013 8:59 am
by sped372
Make sure you've pushed your garage door up all the way too, if you have an automatic opener sometimes they hang down an inch or so below the frame of the doorway and you can buy yourself a little headroom.

Re: poptop removal

Posted: Tue Aug 06, 2013 9:05 am
by Danny79
I unhooked the garage door, pushed up and clamped on a vice grips to hold the door up and the 78 westy just squeaked by...and Dave once just put his bus on RIMS (1965 21 window) just to fit it in his garage...

Re: poptop removal

Posted: Tue Aug 06, 2013 1:22 pm
by dingo
Its a thick wooden beam on an oldish appt building...ill try the tire deflation...i may get enough to squeak under