Gretchen Ghia sags in the middle a smidge. Enough to slightly misalign the doors to their strike plates. Mike at House of Ghia in Salem mentioned some spacers that flatten over the years and can be replaced. They're between the body and the pan near the rear wheels somewhere.
Has anyone tackled this? How do I find where these spacers are?
Here are the spacers I picked up at Always.
thanks,
neal
Sagging Ghia Body
- ruckman101
- Lord God King Bwana
- Location: Up next to a volcano.
- Contact:
- Status: Offline
Sagging Ghia Body
The slipper has no teeth.
- Amskeptic
- IAC "Help Desk"
- Status: Offline
Re: Sagging Ghia Body
Big job. You will see the body-to-pan bolts along the sides, Follow them. Once you have disturbed the body-to-pan seal, you are in it. And remember, people do it all the time. Great time for a factory manual, not the abbreviated Bentley.ruckman101 wrote:Gretchen Ghia sags in the middle a smidge. Mike at House of Ghia in Salem mentioned some spacers that flatten over the years and can be replaced. They're between the body and the pan near the rear wheels somewhere.
Has anyone tackled this? How do I find where these spacers are?
Colin
BobD - 78 Bus . . . 112,730 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles