In the beginning there were no brake lights, and there still aren't
I jumpered the black and black/red wires at the switch and confirmed that there was light at the brake lights.
Replaced both switches, but the replacement switches at the FLAPS are absolute garbage.
One of them made the brake light come on and stay on all the time, then started leaking out of it's electrical connections.
Pulled them both and put the originals back in. The ones I took out have the VW part number stamped on them and the little VW logo as well. They are probably OK. Hard to say.
I figured a bleed and brake adjustment would be a good place to start (over) - then I can get back to the lights.
The drivers side top bleeder screw is seemingly rusted to the caliper. Hit it with PB blaster, tried again, tried a vice grips, still nada. Ill try hitting it with PB every day for a little while and then try it earlier in the week next week.
Went to the passenger side caliper - WTF is that? Oh, it's the top bleeder valve broken off in the caliper, flush with the caliper. Awesome. I can't bleed the brakes until I find a way to back this broken bleeder valve out and then find/install a replacement.
The stupid thing is that the brakes seem to work great on this bus, even after I likely introduced a bunch of air in the system after replacing and re-replacing the brake switches.
So the new plan is: keep hitting all remaining bleeder valves with PB blaster. acquire replacement/s bleeder valve/s, and likely stock up on good brake fluid. I may as well change it all at this point. not sure if I should use my fancy blue stuff or not.
I need to be able to get out and put some miles on it, so I can then go get it smogged once ive tuned the mixture where it needs to be.
how's the LM-1 IAC rental program these days?
![geek :geek:](./images/smilies/icon_geek.gif)