Where what when?
Colin
Where what when?
I live-broadcasted my short block build two weeks ago for people that were interested in seeing how it all goes together. I was torquing the first main bearing nut when TomWesty (I think) called out three cam bearing shells behind the case all cleaned and ready to go.
What shortblock build?
Mine.
Yes.blue72beetle wrote: ↑Sat Oct 13, 2018 4:01 pmTime for an update for my glacial-progress thread here.
can this be removed and installed without removing the engine or the center intake section?
Fill the carburetor bowl through the little vent pipe, using an eye dropper, about twenty repetitions should do it, but if you see fuel begin to drip into the throat, stop right there and try to start as immediately as you can after putting the air filter back on.blue72beetle wrote: ↑Tue Oct 08, 2019 6:54 amAnother update for this stupid engine. I installed the beautiful carb, and I can't seem to get fuel to flow it. I replaced the fuel filter, and fuel is flowing out of the tank. It starts and runs when I dump a bit of fuel in the top of the carb but cranks forever otherwise. I've even taped off the top of the carb to try to get vacuum to help pull the fuel but no start.
If I can't get this thing started while there's few nice days remaining, I'm going to pull it all and do the Mexican FI over winter. I should've made an appointment with Colin this past summer