Moderators: Sluggo, Amskeptic
-
Amskeptic
- IAC "Help Desk"
![IAC "Help Desk" IAC "Help Desk"](./images/ranks/admin.gif)
-
Status:
Offline
Post
by Amskeptic » Sat Feb 05, 2011 9:56 am
airkooledchris wrote:
after a few parts bus vendors said they would't sell me used backing plates for liability reasons,
You mean the pad shims? Are you kidding? Did you swallow that? Did you ask for an example of a failure? Liability? What the f%@k happens when they sell you a drag link or a steering box??????
Who were they?
Colin????
BobD - 78 Bus . . . 112,730 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles
-
airkooledchris
- IAC Addict!
- Location: Eureka, California
-
Contact:
-
Status:
Offline
Post
by airkooledchris » Sat Feb 05, 2011 10:15 am
Amskeptic wrote:airkooledchris wrote:
after a few parts bus vendors said they would't sell me used backing plates for liability reasons,
You mean the pad shims? Are you kidding? Did you swallow that? Did you ask for an example of a failure? Liability? What the f%@k happens when they sell you a drag link or a steering box??????
Who were they?
yup. Bustedbus were the ones that said they don't sell any used brake parts, period. It wasn't that it was these pad shims specifically. the rep I was speaking to went on to say he re-uses his own without thinking about it, but their official stance was that you should always buy new parts for the brake system when they are available.
I knew it was BS, and im pretty sure the guy I was talking to at the time also felt the same, but rules is rules and I needed something ASAP.
Ken Madson at the busco was happy to sell me a set though, so if anyone needs them, that's where id check first next time. .
1979 California Transporter
-
Sluggo
- Wishin' I was Fishin'
![Wishin' I was Fishin' Wishin' I was Fishin'](./images/ranks/admin.gif)
- Location: Portland, Or.
-
Contact:
-
Status:
Offline
Post
by Sluggo » Mon Feb 07, 2011 8:55 pm
airkooledchris wrote:that said, if you need a set, I certainly don't NEED a spare set since you can re-use them, and would sell them for the same price.
I'll buy em'. Mines running without them.
1977 Bus with Sunroof - "Lucky '77"
2000cc Type IV w/Dual Weber 36s,
Aircooled.net SVDA w/Compufire,
Redline Weber Fuel Pump,
Holley Regulator,
Half Ass Brush & Roller Rustoleum Paint Job,
Incomplete Custom Interior,
Dual Batteries,
Crunched Slider Door.
------------------------------------------------------
-
chitwnvw
- Resident Troublemaker
- Location: Chicago.
-
Status:
Offline
Post
by chitwnvw » Mon Feb 07, 2011 9:30 pm
Sluggo wrote:airkooledchris wrote:that said, if you need a set, I certainly don't NEED a spare set since you can re-use them, and would sell them for the same price.
I'll buy em'. Mines running without them.
I got some from Chris/busted, so that is cool with me.
-
airkooledchris
- IAC Addict!
- Location: Eureka, California
-
Contact:
-
Status:
Offline
Post
by airkooledchris » Mon Feb 07, 2011 9:39 pm
that's so weird, bustedbus was the ones that wouldn't sell me any.
anywho, im glad you tracked some down. these are Sluggo's then...
1979 California Transporter
-
chitwnvw
- Resident Troublemaker
- Location: Chicago.
-
Status:
Offline
Post
by chitwnvw » Mon Feb 07, 2011 9:45 pm
airkooledchris wrote:that's so weird, bustedbus was the ones that wouldn't sell me any.
anywho, im glad you tracked some down. these are Sluggo's then...
Maybe he got sued or threatened? Who knows. Seems silly, it is just stamped steel to prevent the piston from rotating....maybe I got them from ken at busco...I am getting old.
![pale :pale:](./images/smilies/icon_pale.gif)
-
Amskeptic
- IAC "Help Desk"
![IAC "Help Desk" IAC "Help Desk"](./images/ranks/admin.gif)
-
Status:
Offline
Post
by Amskeptic » Wed Feb 09, 2011 4:46 pm
chitwnvw wrote: ..I am getting old.
![pale :pale:](./images/smilies/icon_pale.gif)
Yeah, you used to be so . . . resident troublesome.
Colin
BobD - 78 Bus . . . 112,730 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles
-
Manfred
- Old School!
- Location: Chicago
-
Status:
Offline
Post
by Manfred » Fri Feb 11, 2011 11:26 am
airkooledchris wrote:
I didn't rebuild the rear drums yet. they are well adjusted and I have some shoes left yet, but I will slowly get all the parts needed to finish off the rear end as well.
As for the super blue brake fluid, I did it because Ratwell said so. more specifically it made it really easy to know when your done bleeding, as once you see blue, your done!
Next time ill use regular colored fluid for the opposite effect, then back to blue. they also happened to sell the blue ATE fluid where I picked up my motive power bleeder adapter...
Good idea. I must forgotten about the blue die. The brake fluid that was in my lines when I bought the bus was so dirty, it wasn't hard to know when the old stuff was flushed out. But I'll try and remember the colored brake fluid next time...I wonder if food coloring would work?
1978 Westy FI
hambone wrote:Some times ya gotta wing it.
-
Mike Boell
- Old School!
-
Status:
Offline
Post
by Mike Boell » Tue Apr 12, 2011 11:37 am
Not intending to hijack this post but I am getting ready to do a complete brake job myself.
I sent an email to the guy in Beaverton inquiring about NOS parts but in the time being I was curious about the items GoWesty sells.
Brembo Front Brake Discs $48.02
Meyle front brake hose $9.68
Meyle right rear hose $8.13
Meyle left hose $9.72
Meyle rear wheel cylinder $8.93
Meyle Front pad set $23.72
Enduro Rear brake shoe set $28.03
Are these brands and prices good? Free shipping over $50.00.
Thanks
Mike
Mike Boell
1975 FI Westy
Oregon City
SOME PEOPLE ARE LIKE SLINKIES - NOT REALLY GOOD FOR ANYTHING BUT THEY BRING A SMILE TO YOUR FACE WHEN THEY'RE PUSHED DOWN THE STAIRS.
-
Sluggo
- Wishin' I was Fishin'
![Wishin' I was Fishin' Wishin' I was Fishin'](./images/ranks/admin.gif)
- Location: Portland, Or.
-
Contact:
-
Status:
Offline
Post
by Sluggo » Tue Apr 12, 2011 12:15 pm
Mike Boell wrote:Not intending to hijack this post but I am getting ready to do a complete brake job myself.
I sent an email to the guy in Beaverton inquiring about NOS parts but in the time being I was curious about the items GoWesty sells.
Brembo Front Brake Discs $48.02
Meyle front brake hose $9.68
Meyle right rear hose $8.13
Meyle left hose $9.72
Meyle rear wheel cylinder $8.93
Meyle Front pad set $23.72
Enduro Rear brake shoe set $28.03
Are these brands and prices good? Free shipping over $50.00.
Thanks
Mike
I've used the Meyle hoses with no complaints. Can't comment on the other items.
1977 Bus with Sunroof - "Lucky '77"
2000cc Type IV w/Dual Weber 36s,
Aircooled.net SVDA w/Compufire,
Redline Weber Fuel Pump,
Holley Regulator,
Half Ass Brush & Roller Rustoleum Paint Job,
Incomplete Custom Interior,
Dual Batteries,
Crunched Slider Door.
------------------------------------------------------
-
tristessa
- Trusted Air-Cooled Maniac
- Location: Uwish Uknew, Oregon
-
Status:
Offline
Post
by tristessa » Sat Apr 16, 2011 12:28 pm
I've had no problem with Enduro shoes over the years. Rotors would be hard to mess up, especially for Brembo. Sure, sh*t happens but they don't get Porsche contracts by making garbage...
Remember, only YOU can prevent narcissism!
-
Westy78
- IAC Addict!
- Location: Stumptown OR
-
Status:
Offline
Post
by Westy78 » Sat Apr 16, 2011 12:58 pm
I've had the Brembos on mine for years. No problems.
Chorizo, it's what's for breakfast.
-
Mike Boell
- Old School!
-
Status:
Offline
Post
by Mike Boell » Sat Apr 16, 2011 1:31 pm
Thanks guys for the replies,
Sounds like I will go with the hoses and the rotors
So the Meyle rear wheel cylinder for $8.93, give it a try or do you recommend another brand?
GoWesty also had these brands,
Ate $18.27
TRW $12.20
KMM $5.08
I also forgot to ask,
If I should need rear drums, GoWesty has OMC PT #VWA016935 for $41.00.
Thanks again
Mike
Mike Boell
1975 FI Westy
Oregon City
SOME PEOPLE ARE LIKE SLINKIES - NOT REALLY GOOD FOR ANYTHING BUT THEY BRING A SMILE TO YOUR FACE WHEN THEY'RE PUSHED DOWN THE STAIRS.
-
Amskeptic
- IAC "Help Desk"
![IAC "Help Desk" IAC "Help Desk"](./images/ranks/admin.gif)
-
Status:
Offline
Post
by Amskeptic » Sun Apr 17, 2011 7:59 pm
Mike Boell wrote:Thanks guys for the replies,
Sounds like I will go with the hoses and the rotors
So the Meyle rear wheel cylinder for $8.93, give it a try or do you recommend another brand?
GoWesty also had these brands,
Ate $18.27
TRW $12.20
KMM $5.08
I also forgot to ask,
If I should need rear drums, GoWesty has OMC PT #VWA016935 for $41.00.
Thanks again
Mike
I personally go for ATE with the brake stuff, but keep us updated on how the Meyle's perform.
Colin
BobD - 78 Bus . . . 112,730 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles
-
Sluggo
- Wishin' I was Fishin'
![Wishin' I was Fishin' Wishin' I was Fishin'](./images/ranks/admin.gif)
- Location: Portland, Or.
-
Contact:
-
Status:
Offline
Post
by Sluggo » Mon Apr 18, 2011 12:29 pm
You can get Rebuilt ATE brake calipers & cylinders at O'Reilly Auto Parts. Been very happy with mine.
1977 Bus with Sunroof - "Lucky '77"
2000cc Type IV w/Dual Weber 36s,
Aircooled.net SVDA w/Compufire,
Redline Weber Fuel Pump,
Holley Regulator,
Half Ass Brush & Roller Rustoleum Paint Job,
Incomplete Custom Interior,
Dual Batteries,
Crunched Slider Door.
------------------------------------------------------