![Image](http://i644.photobucket.com/albums/uu167/aopisa/bike_rack-4099.jpg)
Steering box bolt - SOLVED!
- aopisa
- Addicted!
- Location: Vermont
- Status: Offline
Steering box bolt - SOLVED!
I was looking under the front end of my bus today and noticed a missing bolt from the steering box. It must have fallen out recently by the looks of how clean the threads are. Where can I get a replacement? The steering box is still immovably attached to the frame. Can I drive it this way until I can find a replacement bolt?
![Image](http://i644.photobucket.com/albums/uu167/aopisa/bike_rack-4099.jpg)
![Image](http://i644.photobucket.com/albums/uu167/aopisa/bike_rack-4099.jpg)
1977 Westy 2.0L F.I.
Flow with whatever may happen and let your mind be free. Stay centered by accepting whatever you are doing. This is the ultimate. - Chuang Tzu
Flow with whatever may happen and let your mind be free. Stay centered by accepting whatever you are doing. This is the ultimate. - Chuang Tzu
- Amskeptic
- IAC "Help Desk"
- Status: Offline
Re: Steering box bolt
Consult your Bentley. It will have bolt specifications and tightening torque. Buy a bolt. Install. Now. Oh, and check the torques on the other bolts. That is weird.aopisa wrote:I was looking under the front end of my bus today and noticed a missing bolt from the steering box. It must have fallen out.
Colin
![cyclops_ani :cyclopsani:](./images/smilies/icon_cyclops_ani.gif)
BobD - 78 Bus . . . 112,730 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles
- aopisa
- Addicted!
- Location: Vermont
- Status: Offline
- Amskeptic
- IAC "Help Desk"
- Status: Offline
If you do not find it in the specifications table at the end of the front end chapter, look in the text around steering box removal and installation. If still no, perhaps take one of the other bolts off at the store. Be sure to reinstall.aopisa wrote:I thought it might be in the Bentley, but did not see it. I will go back and scour through it. Thanks.
Colin
BobD - 78 Bus . . . 112,730 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles
- aopisa
- Addicted!
- Location: Vermont
- Status: Offline
Will do, thanks. I was afraid of just blindly replacing with a store replacement because I did not want to mess up the threads in case they were different. Or is that being too paranoid?
1977 Westy 2.0L F.I.
Flow with whatever may happen and let your mind be free. Stay centered by accepting whatever you are doing. This is the ultimate. - Chuang Tzu
Flow with whatever may happen and let your mind be free. Stay centered by accepting whatever you are doing. This is the ultimate. - Chuang Tzu
- sped372
- IAC Addict!
- Location: Waunakee, WI
- Status: Offline
Maybe I'm not looking at the photo right but it seems strange that you can see threads in the hole. If that's the steering box, and I assume it's bolted into the frame, shouldn't it be a through hole with threads in the frame? Or does the bolt come from the backside?
1971 Karmann Ghia - 1600 DP
1984 Westfalia - 1.9 WBX
1984 Westfalia - 1.9 WBX
- aopisa
- Addicted!
- Location: Vermont
- Status: Offline
Yeah, that's what I was afraid of. Something as simple a bolt can really cause a big problem. The Bentley doesn't seem to have a spec on it. I hope the other one is easy to get to.RussellK wrote:Thats not being paranoid you must be sure the diameter and the pitch is correct or you will damage the threads. If you're not absolutely positive take the other bolt out and take it with you
I know this is a dumb question,but if I'm going to be unbolting my steering box in a parking lot would my best option be a FLAPS or a hardware store? A junkyard would be best, 30 seconds and done. Finding a bus in a junkyard around here is a needle in a haystack type operation.
1977 Westy 2.0L F.I.
Flow with whatever may happen and let your mind be free. Stay centered by accepting whatever you are doing. This is the ultimate. - Chuang Tzu
Flow with whatever may happen and let your mind be free. Stay centered by accepting whatever you are doing. This is the ultimate. - Chuang Tzu
- aopisa
- Addicted!
- Location: Vermont
- Status: Offline
I have to go look at it again, but I think the Bentley shows it going from the frame side through to the gearbox, p30, fig. 9-17?sped372 wrote:Maybe I'm not looking at the photo right but it seems strange that you can see threads in the hole. If that's the steering box, and I assume it's bolted into the frame, shouldn't it be a through hole with threads in the frame? Or does the bolt come from the backside?
1977 Westy 2.0L F.I.
Flow with whatever may happen and let your mind be free. Stay centered by accepting whatever you are doing. This is the ultimate. - Chuang Tzu
Flow with whatever may happen and let your mind be free. Stay centered by accepting whatever you are doing. This is the ultimate. - Chuang Tzu
- aopisa
- Addicted!
- Location: Vermont
- Status: Offline
SOLVED
False alarm. The "weird" comment from Colin kind of tipped me off as well as sped372 noticing that the bolt probably came through the other side.
Indeed the steering box is bolted through the frame first. The PO had a receiver hitch installed for a custom bike rack. It appears that at least one of the mount points for that hitch uses the same frame hole as the steering box. The bolt passes through the receiver then the frame and finally into the steering box. Close inspection with a flashlight reveals that there is a bolt in there. They must have used the same bolt so it comes up a few mm shy of being flush with the steering box. Perhaps there was some kind of cap that recently fell out and is now exposing shiny threads?
Thanks to everyone that helped trouble shoot this issue.
Indeed the steering box is bolted through the frame first. The PO had a receiver hitch installed for a custom bike rack. It appears that at least one of the mount points for that hitch uses the same frame hole as the steering box. The bolt passes through the receiver then the frame and finally into the steering box. Close inspection with a flashlight reveals that there is a bolt in there. They must have used the same bolt so it comes up a few mm shy of being flush with the steering box. Perhaps there was some kind of cap that recently fell out and is now exposing shiny threads?
Thanks to everyone that helped trouble shoot this issue.
1977 Westy 2.0L F.I.
Flow with whatever may happen and let your mind be free. Stay centered by accepting whatever you are doing. This is the ultimate. - Chuang Tzu
Flow with whatever may happen and let your mind be free. Stay centered by accepting whatever you are doing. This is the ultimate. - Chuang Tzu
- sped372
- IAC Addict!
- Location: Waunakee, WI
- Status: Offline