Anybody know how to put this thing on? My old one is shot.
Clutch Arm Return Spring
- Hippie
- IAC Addict!
- Location: 41º 35' 27" N, 93º 37' 15" W
- Status: Offline
- midatlanticys
- Addicted!
- Location: Azores Portugal
- Status: Offline
Hippie - how about this? http://www.thesamba.com/vw/forum/viewtopic.php?t=296925
or this?
http://www.thesamba.com/vw/forum/viewtopic.php?t=217845
g'luck
or this?
http://www.thesamba.com/vw/forum/viewtopic.php?t=217845
g'luck
"The sad thing about governments is that in every single case, government formed by the people eventually becomes so large it begins to prey upon the people who created it.” -- B. Hoover
- Hippie
- IAC Addict!
- Location: 41º 35' 27" N, 93º 37' 15" W
- Status: Offline
I got it. It wasn't that bad.
Hook the spring on the arm, put the arm on halfway, like in the link above. Pull the metal dust cover thing out to meet the arm so that the spring centers around it.
Push up the straight end of the spring with a wide, flat screwdriver until it hoks on the shelf cast onto the tranny housing. (Safety glasses on)
Then just shove the whole assembly the rest of the way onto the shaft--making sure to seat straight end of the spring the all the way onto the shelf.
Put on the C-clip. Put the clutch cable back inthe arm with the wingnut.
Done.
Hook the spring on the arm, put the arm on halfway, like in the link above. Pull the metal dust cover thing out to meet the arm so that the spring centers around it.
Push up the straight end of the spring with a wide, flat screwdriver until it hoks on the shelf cast onto the tranny housing. (Safety glasses on)
Then just shove the whole assembly the rest of the way onto the shaft--making sure to seat straight end of the spring the all the way onto the shelf.
Put on the C-clip. Put the clutch cable back inthe arm with the wingnut.
Done.