Page 1 of 1
Clutch Arm Return Spring
Posted: Fri Aug 27, 2010 2:03 pm
by Hippie
Anybody know how to put this thing on? My old one is shot.
Posted: Fri Aug 27, 2010 3:10 pm
by midatlanticys
Posted: Fri Aug 27, 2010 4:22 pm
by Hippie
Did you ever know that you're my heeeero?
Posted: Sat Sep 04, 2010 5:27 pm
by Hippie
I got it. It wasn't that bad.
Hook the spring on the arm, put the arm on halfway, like in the link above. Pull the metal dust cover thing out to meet the arm so that the spring centers around it.
Push up the straight end of the spring with a wide, flat screwdriver until it hoks on the shelf cast onto the tranny housing. (Safety glasses on)
Then just shove the whole assembly the rest of the way onto the shaft--making sure to seat straight end of the spring the all the way onto the shelf.
Put on the C-clip. Put the clutch cable back inthe arm with the wingnut.
Done.