Page 1 of 1
Vendors - Engine
Posted: Mon Dec 29, 2008 8:03 pm
by Amskeptic
Capitalize your vendor's best part/service at the top of your post)
CYLINDER HEAD/ENGINE REBUILDING/MACHINING
Blablahblah
**** Blah St,
Blahblah, BL *****
Posted: Tue Dec 30, 2008 9:50 am
by hambone
QUALITY ENGINE PARTS, SVDA DISTRIBUTORS
(quality marginal on some parts, caveat empor)
www.aircooled.net
Aircooled.Net, Inc.
362 W. 6100 South, Unit A
Murray , UT 84107
Customer Service --
801-453-1906 (phone)
801-943-4176 (fax)
Posted: Mon Jan 12, 2009 11:39 am
by hambone
HIGH QUALITY ENGINE PARTS
Kustom 1 Warehouse
1314 West Collins Ave
Orange, Ca. 92867
888-997-9894
http://www.kustom1warehouse.net/
( EDIT 04/10/15: caution, some parts are abysmal EMPI )
Posted: Wed Feb 11, 2009 1:12 pm
by Amskeptic
Posted: Sun Nov 29, 2009 4:43 pm
by Amskeptic
(edit 5/19- NOT) QUALITY CYLINDER HEAD MACHINE WORK
(prefers Type 1, but sweet talk helps)
Performance Workshop
9000 Arlington Avenue Suite 111
Riverside CA 92503
(951) 689-7475
5/19 - see below regarding exhaust seats and guide bosses:
viewtopic.php?f=76&t=13276
Rebuilt/rebuilder Thermostat
Posted: Sun Aug 14, 2011 12:46 pm
by bajaman72
Re: Vendors - Engine
Posted: Tue Aug 23, 2011 11:09 am
by Snap
Cylinder Head Rebuild & Machine work
Steve's Precision Machine
13959 Southwest 72nd Avenue
Tigard, OR 97223
(503) 620-0559
http://stevesprecisionmachine.com/
Good work, fair prices, and quick turn around (few days).
-Work I had done-
Three angle grind $75
Replace (4) exhaust seats on type 1 heads for $80 (parts & labor)
Re: Vendors - Engine
Posted: Tue Aug 23, 2011 5:11 pm
by Hippie
HARD TO FIND AND DISCONTINUED PARTS--GOOD, USED
http://bustedbus.com/
Re: Vendors - Engine
Posted: Tue May 14, 2019 11:19 am
by satchmo
HARD TO FIND DISTRIBUTOR PARTS
https://www.vwnos.com/distributor
Hardware, rebuild kits/parts and hard to find vacuum cans.
Satchmo
Re: Vendors - Engine
Posted: Thu May 16, 2019 7:17 am
by Amskeptic
Website looks good, "About" info looks skinny.
Have you seen this outfit before?
Colin
Re: Vendors - Engine
Posted: Thu May 16, 2019 7:37 am
by satchmo
Amskeptic wrote: ↑Thu May 16, 2019 7:17 am
Website looks good, "About" info looks skinny.
Have you seen this outfit before?
Colin
Before a month ago, no. I ordered some fiber washers from them to have on hand as I cleaned and rebuilt my distributor (2.1 WBX with the Hall sensor). The washers were inexpensive, shipping was cheap (they came in an envelope in the mail) and fast.
Satchmo
Re: Vendors - Engine
Posted: Thu May 16, 2019 10:37 am
by asiab3
My orders from VWNOS were filled quickly as well. He's very active on The Samba late bug forum, and was a hobbyist for a few years before filling a gap in the market.
Robbie
Re: Vendors - Engine
Posted: Thu Feb 06, 2020 4:51 pm
by bajaman72
ENGINE REBUILD
European Motorworks
13224 Prairie Avenue
Hawthorne, California 90250
Telephone (310) 644-8038
(800) 722-8678 in U.S.
Fax (310) 644-8042
George did a great job on the rebuild. Running Great!
Re: Vendors - Engine
Posted: Sat Feb 08, 2020 6:53 am
by Amskeptic
bajaman72 wrote: ↑Thu Feb 06, 2020 4:51 pm
ENGINE REBUILD
European Motorworks
13224 Prairie Avenue
Hawthorne, California 90250
Telephone (310) 644-8038
(800) 722-8678 in U.S.
Fax (310) 644-8042
George did a great job on the rebuild. Running Great!
Keep us apprised!
What were your "stats" on this rebuild? End play? Compression ratio? etc
Re: Vendors - Engine
Posted: Sun May 16, 2021 4:07 pm
by Jivermo
Yes, Bajaman...how did this engine build hold up, please?