Crush washers
- chitwnvw
- Resident Troublemaker
- Location: Chicago.
- Status: Offline
Crush washers
Anyone know where you can find crush washers and copper washers, that sort of thing? Seems silly to buy a whole new gasket kit....
- Sluggo
- Wishin' I was Fishin'
- Location: Portland, Or.
- Contact:
- Status: Offline
If your talking about the ones for the oil drain plu, don't get em from Bus Depot. Theirs are 14mm ID when they should be 12mm. I'm looking at some for a Harley. I'll let you know. I've been using the aluminum washers for the sump on the drain plug. Good fit but they only come with the gasket kit. So I have several spare gaskets with no crush washer.
1977 Bus with Sunroof - "Lucky '77"
2000cc Type IV w/Dual Weber 36s,
Aircooled.net SVDA w/Compufire,
Redline Weber Fuel Pump,
Holley Regulator,
Half Ass Brush & Roller Rustoleum Paint Job,
Incomplete Custom Interior,
Dual Batteries,
Crunched Slider Door.
------------------------------------------------------
- soulful66
- Addicted!
- Status: Offline
check this out http://www.belmetric.com/html/catalog17.htm this is were I have bought good hardware.
Best Regards,
John
Best Regards,
John
- Sluggo
- Wishin' I was Fishin'
- Location: Portland, Or.
- Contact:
- Status: Offline
Thanks for the link! Bottom left hand corner is what you'd want. 12x18 hollow crush washer.soulful66 wrote:check this out http://www.belmetric.com/html/catalog17.htm this is were I have bought good hardware.
Best Regards,
John
1977 Bus with Sunroof - "Lucky '77"
2000cc Type IV w/Dual Weber 36s,
Aircooled.net SVDA w/Compufire,
Redline Weber Fuel Pump,
Holley Regulator,
Half Ass Brush & Roller Rustoleum Paint Job,
Incomplete Custom Interior,
Dual Batteries,
Crunched Slider Door.
------------------------------------------------------
- chitwnvw
- Resident Troublemaker
- Location: Chicago.
- Status: Offline
Ditto. That's a cool site. I've got 16mm and 22mm on the oil control and oil relief plugs. In the gasket kit I got the 22 was a crush washer and the 16 was copper.
On the taco plate Colin had told me that a copper washer was needed for each of the bolts to get a good seal.
That and the oil drain plug, but those usually come with the strainer gaskets.
Any others that I'm missing?
On the taco plate Colin had told me that a copper washer was needed for each of the bolts to get a good seal.
That and the oil drain plug, but those usually come with the strainer gaskets.
Any others that I'm missing?
- Sluggo
- Wishin' I was Fishin'
- Location: Portland, Or.
- Contact:
- Status: Offline
First place I checked.bottomend wrote:Slush, we should try to find a source local to us fro stuff like this. I wonder if our little hardwear store has these?
1977 Bus with Sunroof - "Lucky '77"
2000cc Type IV w/Dual Weber 36s,
Aircooled.net SVDA w/Compufire,
Redline Weber Fuel Pump,
Holley Regulator,
Half Ass Brush & Roller Rustoleum Paint Job,
Incomplete Custom Interior,
Dual Batteries,
Crunched Slider Door.
------------------------------------------------------
- chitwnvw
- Resident Troublemaker
- Location: Chicago.
- Status: Offline
They want me to buy in boxes of at least 100. Anyone want to go in on a bulk buy?soulful66 wrote:check this out http://www.belmetric.com/html/catalog17.htm this is were I have bought good hardware.
Best Regards,
John
- Sluggo
- Wishin' I was Fishin'
- Location: Portland, Or.
- Contact:
- Status: Offline
I will. 12 X 18 Hollow Copper Crush. How much are they?chitwnvw wrote:They want me to buy in boxes of at least 100. Anyone want to go in on a bulk buy?soulful66 wrote:check this out http://www.belmetric.com/html/catalog17.htm this is were I have bought good hardware.
Best Regards,
John
1977 Bus with Sunroof - "Lucky '77"
2000cc Type IV w/Dual Weber 36s,
Aircooled.net SVDA w/Compufire,
Redline Weber Fuel Pump,
Holley Regulator,
Half Ass Brush & Roller Rustoleum Paint Job,
Incomplete Custom Interior,
Dual Batteries,
Crunched Slider Door.
------------------------------------------------------