KYB Gas Adjust Shocks
- hambone
- Post-Industrial Non-Secular Mennonite
- Location: Portland, Ore.
- Status: Offline
KYB Gas Adjust Shocks
A very good deal is on Amazon.com with free shipping.
A set of 4 for an early bay is $145 total. Yep.
Just passing this along.
A set of 4 for an early bay is $145 total. Yep.
Just passing this along.
http://greencascadia.blogspot.com
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
- hambone
- Post-Industrial Non-Secular Mennonite
- Location: Portland, Ore.
- Status: Offline
Is this valid?
GostaBerling wrote:
Rear shock lower and upper bolts= 43ft. lbs.
Front shock
-install lower part of shock on the stud in lower torsion arm.
-incline the top of shock absorber about 30 degrees to the rear, and then torque the nut to 18-25ft. lb.
-move the top end of absorber into line with the upper mounting hole. Torque upper bolt to 36ft. lb.
All figures and procedures taken from Bentley manual. Hope that helps.
An important "detail": The "about 30 degrees to the rear" bit, applies if and only if, you've jacked up the front ( wheels hanging loose ).
It is simpler to change the front shocks, with no jacking up; Then there is no 30 degree to care about. Then, just install and torque.
GostaBerling wrote:
Rear shock lower and upper bolts= 43ft. lbs.
Front shock
-install lower part of shock on the stud in lower torsion arm.
-incline the top of shock absorber about 30 degrees to the rear, and then torque the nut to 18-25ft. lb.
-move the top end of absorber into line with the upper mounting hole. Torque upper bolt to 36ft. lb.
All figures and procedures taken from Bentley manual. Hope that helps.
An important "detail": The "about 30 degrees to the rear" bit, applies if and only if, you've jacked up the front ( wheels hanging loose ).
It is simpler to change the front shocks, with no jacking up; Then there is no 30 degree to care about. Then, just install and torque.
http://greencascadia.blogspot.com
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
- Amskeptic
- IAC "Help Desk"
- Status: Offline
Very valid. This is the ol' Only Tighten Shocks At Ride Height so you don't torsionally stress the bushings.hambone wrote:Is this valid?
Rear shock bolts= 43ft. lbs.
-incline the top of shock absorber about 30 degrees to the rear, and then torque the nut to 18-25ft. lb.
-move the top end of absorber into line with the upper mounting hole. Torque upper bolt to 36ft. lb.
The "about 30 degrees to the rear" bit, applies if and only if, you've jacked up the front ( wheels hanging loose ).
Colin
BobD - 78 Bus . . . 112,730 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles
- hambone
- Post-Industrial Non-Secular Mennonite
- Location: Portland, Ore.
- Status: Offline
The wheels do not need to come off? I guess not, considering the front shock procedure. What about the rears?
http://greencascadia.blogspot.com
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
- hambone
- Post-Industrial Non-Secular Mennonite
- Location: Portland, Ore.
- Status: Offline
When should one cut the plastic retaining straps on the new shocks? Does it even matter? I don't want it to go shooting off across town!
I don't think shocks work that way however.
Rear shocks arrived in the mail, fronts tomorrow. I can't wait til I stop bouncing around like....like....uh...JELLO!
I don't think shocks work that way however.
Rear shocks arrived in the mail, fronts tomorrow. I can't wait til I stop bouncing around like....like....uh...JELLO!
http://greencascadia.blogspot.com
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
- hambone
- Post-Industrial Non-Secular Mennonite
- Location: Portland, Ore.
- Status: Offline
No but I haveta. The idea is somewhere in the pile!
Thanks Chi. I'll try it that way. The less I have to do the better.
Thanks Chi. I'll try it that way. The less I have to do the better.
http://greencascadia.blogspot.com
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
- hambone
- Post-Industrial Non-Secular Mennonite
- Location: Portland, Ore.
- Status: Offline
Amazon sent me the shocks. Same part # on the box, but one is a gigantic red beast with an accordion plastic end...dis' ain'tt rhite. The other was the right one...
Back, back into parts hell. Has anyone ordered parts from them before? I haven't. Not sure if this is common.
Should I replace the bolts? Really wasn't planning on it but ya never know. I guess I'll cross that bridge when I get there.
Back, back into parts hell. Has anyone ordered parts from them before? I haven't. Not sure if this is common.
Should I replace the bolts? Really wasn't planning on it but ya never know. I guess I'll cross that bridge when I get there.
http://greencascadia.blogspot.com
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
- chitwnvw
- Resident Troublemaker
- Location: Chicago.
- Status: Offline
Manfred made the suggestion to me and it made a huge difference. 25 bucks, 2 bolts and I was back on the road with much better handling, especially in the high winds, high speeds on the highway.hambone wrote:No but I haveta. The idea is somewhere in the pile!
Thanks Chi. I'll try it that way. The less I have to do the better.
- Amskeptic
- IAC "Help Desk"
- Status: Offline
From . . . . Amazon????????????????? Why . . . . no.hambone wrote: Back, back into parts hell. Has anyone ordered parts from them before?
Don't plan to.
Colin
BobD - 78 Bus . . . 112,730 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles
- hambone
- Post-Industrial Non-Secular Mennonite
- Location: Portland, Ore.
- Status: Offline
It was pretty easy to send the part back tho. UPS came to my door.
Front shocks in! And new damper for good measure, BOGE Brazil.
They came out like buttah.
40k miles on the old ones. Bad roads.
Still waiting on the 1 rear.
Front shocks in! And new damper for good measure, BOGE Brazil.
They came out like buttah.
40k miles on the old ones. Bad roads.
Still waiting on the 1 rear.
http://greencascadia.blogspot.com
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
- justgimmecoffee
- Old School!
- Location: Hawaii
- Contact:
- Status: Offline
- BellePlaine
- IAC Addict!
- Location: Minnesota
- Status: Offline
Amskeptic wrote:Very valid. This is the ol' Only Tighten Shocks At Ride Height so you don't torsionally stress the bushings.hambone wrote:Is this valid?
Rear shock bolts= 43ft. lbs.
-incline the top of shock absorber about 30 degrees to the rear, and then torque the nut to 18-25ft. lb.
-move the top end of absorber into line with the upper mounting hole. Torque upper bolt to 36ft. lb.
The "about 30 degrees to the rear" bit, applies if and only if, you've jacked up the front ( wheels hanging loose ).
Colin
I did it that way. Goofy.
1975 Riviera we call "Spider-Man"
- hambone
- Post-Industrial Non-Secular Mennonite
- Location: Portland, Ore.
- Status: Offline
It was pretty easy and accessible to do it with wheels on. Having an air gun is an added plus.
10 years 40k miles. That doesn't seem like they should be dead yet. The old ones are still compressible, but the new ones got rid of the bouncy-bounce. Otherwise the difference is subtle. They are probably just on their way out. It should make a difference when I replace the rears too.
10 years 40k miles. That doesn't seem like they should be dead yet. The old ones are still compressible, but the new ones got rid of the bouncy-bounce. Otherwise the difference is subtle. They are probably just on their way out. It should make a difference when I replace the rears too.
http://greencascadia.blogspot.com
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
- BellePlaine
- IAC Addict!
- Location: Minnesota
- Status: Offline