Page 1 of 1

Quick question on my throttle cable

Posted: Mon May 17, 2010 7:33 pm
by Kubelwagen
So, got the new cable threaded through the "tube" on my 81 Vanagon easy, peasy till the last 6 inches or so. Jammed solid, won't go through from either direction.

So, can I wack the "tube" which, at that point, seems to be spring coil with rubber casing and replace it with FI tubing? Or do I need to replace that whole section with actual part?

Thanks,

Michael

Posted: Wed May 19, 2010 7:19 pm
by Kubelwagen
Hmm.... talked to Halsey's. Seems this is a no longer available part. On to plan B.....

Posted: Wed May 19, 2010 7:57 pm
by chitwnvw
Your throttle cable isn't available? I can't imagine the '79 cable is any shorter....

Posted: Wed May 19, 2010 9:20 pm
by Kubelwagen
No, got the cable. The cable tube was toast - the tube that the cable runs through. There's a piece that runs from just forward of the tranny back to the engine.

Posted: Thu May 20, 2010 2:08 am
by chitwnvw
Or maybe bicycle brake cable housing which is basically "spring coil with rubber casing".

Posted: Thu May 20, 2010 7:17 pm
by Kubelwagen
You know, I think I'm going to do that. I've been out of town and unable to finish up, but bike cable should do great, the cables are basically the same.

Thanks,

Mike