Fastback, Squareback, Notchback, T-3 Karmann Ghia.
Moderators: Sluggo, Amskeptic
-
Elwood
- IAC Addict!
- Location: So Cal
-
Status:
Offline
Post
by Elwood » Sat May 02, 2009 10:24 am
Anyone on here with a Notchback? New guy in my town left a note on Elwood a couple weeks ago saying he had been around vws a long time and did welding, mainly making safari racks. I put note in glove box for future need. Soooo yesterday he approched me at hardware store and was very interesting and has had many splits and a favorite Champaine(sp) bay he lost to a fire, then he said he was restoring a '64 Notch and was having trouble finding door rubber, he does not do internet
![cyclops_ani :cyclopsani:](./images/smilies/icon_cyclops_ani.gif)
I would love to help him and after going over to TS --- TMI and I really don,t care to post there anymore but would PM the right person with knowledge of possible supplier. Anyone know if that would be Tram?
Thanks for any info, I got a vw person in my little town to talk to
![bounce :bounce:](./images/smilies/icon_bounce.gif)
'69 weekender ~ Elwood
-
tristessa
- Trusted Air-Cooled Maniac
- Location: Uwish Uknew, Oregon
-
Status:
Offline
Post
by tristessa » Sat May 02, 2009 1:00 pm
If he's doing a bone-stock restoration project, probably the best source is going to be ISP West. It's really "open yer wallet" though, original-style T3 doorseals ain't cheap .. even the cheap (read: crap) ones.
If absolute stock perfection isn't an issue, DDB has a kit that uses a modern style "on body" seal for the doors that replaces the pinchwelt around the opening .. under $100 for the pair IIRC but I haven't checked recently. Works well, looks good .. but doesn't look original.
http://www.vwispwest.com
http://www.theddb.com
Remember, only YOU can prevent narcissism!
-
Amskeptic
- IAC "Help Desk"
![IAC "Help Desk" IAC "Help Desk"](./images/ranks/admin.gif)
-
Status:
Offline
Post
by Amskeptic » Sat May 02, 2009 7:09 pm
tristessa wrote:If he's doing a bone-stock restoration project, probably the best source is going to be ISP West. It's really "open yer wallet" though, original-style T3 doorseals ain't cheap .. even the cheap (read: crap) ones.
If absolute stock perfection isn't an issue, DDB has a kit that uses a modern style "on body" seal for the doors that replaces the pinchwelt around the opening .. under $100 for the pair IIRC but I haven't checked recently. Works well, looks good .. but doesn't look original.
http://www.vwispwest.com
http://www.theddb.com
Brazilian Type 3 seals are abysmal at $29.99 a PAIR from MidAmerica Motorworks. I got the last OEM German seals (they are always "the last ones") at $123.00 each and haven't looked back.
ISP West is the best source I have run into, but that doesn't mean they are "the best" they are sort of like "the only".
Colin
BobD - 78 Bus . . . 112,730 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles
-
dtrumbo
- IAC Addict!
- Location: Mill Creek, WA
-
Status:
Offline
Post
by dtrumbo » Sun May 03, 2009 5:29 am
I did a little snooping around and found these "German-made" seals.
http://www2.cip1.com/ProductDetails.asp ... C-C10-3300
A pair for $233.95. Of course they're online-only which might be a problem for Elwood's friend. Perhaps he can find someone to order them for him and reimburse them.
- Dick
1970 Transporter. 2015cc, dual Weber IDF 40's
1978 Riviera Camper. Bone stock GE 2.0L F.I.
1979 Super Beetle convertible.
... as it turns out, it was the coil!
-
tristessa
- Trusted Air-Cooled Maniac
- Location: Uwish Uknew, Oregon
-
Status:
Offline
Post
by tristessa » Sun May 03, 2009 8:15 am
Amskeptic wrote:Brazilian Type 3 seals are abysmal at $29.99 a PAIR from MidAmerica Motorworks.
Really? I coulda swore those garbage seals had disappeared from the market
years ago...
Remember, only YOU can prevent narcissism!
-
Elwood
- IAC Addict!
- Location: So Cal
-
Status:
Offline
Post
by Elwood » Sun May 03, 2009 9:59 am
My thanks to Hal, Colin and Dick for replies and links. I will take them over to him today and see what happens. My printer is out of ink but maybe my laptop can pick up wifi signal near his house. Or he can come to my space if he wants, he asked what was under car cover. Jake can be seen from street. He already gave me great advice about how to change my engine deck lid. I have had replacment from a '71 for years and thought I would have to cut license plate light wire to change over, but will not be necessary
Sure is good to have someone that does not have a hand out for everything ~ you guys ROCK xoxo B/E&J
'69 weekender ~ Elwood